- passive 1-way PowerLine Stick with 12x 3″
- dispersion 80° x 15°
- precise & even sound radiation
- sensitivity 96 dB (1 W / 1 m)
- elegant design
- Weight 9 kg
- installation version available
In stoc pentru DEMO si inchiriere
hd PL12 – PowerLine Stick.
hd PL12
The hd PL12 PowerLine Stick is equipped with twelve 3″ broadband speakers. The elegant rounded loudspeaker housing made of aluminum allows a particularly high packing density of the loudspeakers. Therefore, the twelve drivers couple to a 15° vertically opening wavefront that the system operates on the principle of the cylindrical wave. The result is a consistent sound pressure level and nuanced sound from the first to the last row. The large throw range of up to 20 m and horizontal coverage of 80° ensures efficient sound solutions with only a few speakers. This leads to more direct sound, offers a higher speech intelligibility and a high feedback safety in acoustically problematic rooms, with lower basic volume. Therefore, the hd PL column speakers are ideal for voice and music transmission in halls, clubs and churches.
Just like the hd ML16, the hd PL12 shines with a low total height and weight, which facilitates the use in locations with low ceiling height and transport in the car. Due to the increased directivity of the 3″ chassis, the horizontal opening angle is 80° and ensures that the sound energy is bundled even more, thus enabling a longer throw range. With a larger membrane surface area than the hd ML16, the reproduction of music and speech in the low-mid range of the hd PL12 is even more powerful and a higher sound pressure can be achieved. In fixed installations, the extension with subwoofers can be dispensed for voice transmission due to the full-range capability.
In order to transmit a sound event from the fundamental to the overtones, conventional loudspeakers use two or three different types of transducers. This results in incoherence not only in the crossover areas, but also in the important mid-frequency-range due to the different decay times and the different diaphragm mass of the transducers types in a different “response characteristic”. Especially in the reproduction of instruments or speech in which the fundamental range is covered by the one type of transducer and the overtone range by the other type of transducer, the sound is distorted. This is where the hd PL-Series 1-way design shines: full-range speakers that cover the fundamental range up to the harmonic, the linear array with its LineArray benefits, and the coherence of the sound wave, with no “phasing” and group delay a listening experience in a class of its own.
The continuous metal rail for M6 square nuts on the back allows any mounting of wall brackets or a tiltable tripod adapter. On the bottom there is a built-in 35mm flange. A high quality powder coating of the aluminum tube and acoustic foam guarantees the roadworthiness of the PL-Series. For safe transport, we offer a custom-made nylon carrying case with full zip, a handle and shoulder strap.
| Model | hd PL12 |
|---|---|
| Principle | cylindrical wave |
| Transducers | 12x 3″ fullrange chassis |
| Crossover | active at 130 Hz |
| Power handling capacity | 450 W / 630 W |
| Frequency range | 130 Hz – 18 kHz |
| Sensitivity (1 W / 1 m) | 96 dB |
| Max. sound pressure (1 m) | 124 dB |
| Nominal dispersion angle | horizontal 80° x vertical 15° |
| Nominal impedance | 6 Ohms |
| Connection | 1x Speakon NL4 |
| Dimensions (W x H x D) | 108 x 1104 x 104 mm |
| Weight | 9 kg |
| Enclosure | Powder-coated aluminium profile black |
| Options | Speakon NL4 |
